![]() |
|
|
Welcome to Saab92x.com!
|
|
|
This post is reserved for Dyno graphs ONLY:
1. Obviously, dyno graphs!
2. Please post what kind of mods you have
3. the dyno machine (mustang, dyno-jet etc)
THIS THREAD IS MEANT TO BE A DATABASE FOR ALL OF US AND NOT A DISCUSSION THREAD.
PM THE POSTER OR START A NEW TOPIC YOU HAVE ANY QUESTIONS REGARDING A DYNO GRAPH.
Last edited by iota (2006-07-25 19:47:51)
Offline
Offline
Tuned on the DynoJet
-Crucial UpPipe, APS TBE with 3" high flow cat, GM Boost Solenoid, Samco I/C Hoses, State of Nine FloorMats (vroom!)
Graph with Baseline OTS Cobb Stg2 map along wtih 3 consecutive runs after protune with no cool-down in between:
Last edited by Whateverland (2006-07-25 19:10:30)
Offline
Road dyno by EQ Tuning (generally within about 5whp of the gruppe-s mustang dyno)
Offline
Here is my Dynojet Graph.... At the time of this dyno my setup was AP Stage 1 with IC hoses.
Since this dyno I have put on an Invidida Uppipe, Invidia catted DP and a Prodrive Round Tip Axle Back. When I dyno with this new stuff I'll post another graph.
Last edited by rdy4flt (2006-08-05 00:12:56)
Offline
Just tuned last week... pleasantly surprised with the torque but wondering why the hp at the wheels seems low
Dyno:
Mustang Dyno
Mods - stage II:
Perrin Uppipe
TurboXS Stealthback w/ cat
Prodrive Axleback
Offline
Remote tuned by PDX. Actually, this is just one of those 150 dollar basemaps. This was before they adjusted things based on datalogs. Plus this was only running a 14.5psi basemap, huge TMIC, gutted uppipe, gutted 3rd cat and bosal downpipe. No realtime, no massive boost. Tim Bailey is awesome.
Last edited by isis (2007-03-15 17:37:17)
Offline
Mustang dyno, on my RIP car...
Got protuned at XX Tuning in CT (
).
Mods: STi uppipe, Cobb catted DP, Prodrive Oval axleback, IC hoses, Perrin lightweight pulley, SPT intake, NGK one step colder coppers
Before: 202 hp, 212 ft lbs
After: 226 hp, 241 ft lbs
Click on the pictures for full-sized scan.
Last edited by iamchris (2006-12-29 21:29:08)
Offline
(By the way, I don't know why there are two curves on the air/fuel graph...)
Offline
oddly low whp numbers for a protuned car, but nice torque. Everyone was getting low numbers:
Protuned Cobb with stage 2 mods plus headers. Dynojet.
Last edited by heathbar (2007-02-11 18:57:01)
Offline
heath, whats the diff in runs ? why is the 001 lower ? stock map ?
may want to send that to your tuner to get his input.
seems like it starts to taper a tad early
Last edited by goixiz (2007-02-11 18:45:51)
Offline
yeah, i don't know... it had to warm up I guess.
Offline
I'm sure the green is the base pull (OTS Cobb maps). The other 2 are protuned.
And the numbers look completely on track with other protuned cars - 22x whp 24x ft/lbs. That's what most people get on "normal" dynos.
Offline
nimaxpro wrote:
I'm sure the green is the base pull (OTS Cobb maps). The other 2 are protuned.
And the numbers look completely on track with other protuned cars - 22x whp 24x ft/lbs. That's what most people get on "normal" dynos.
nothing was changed after the 1st run, that's the weird part.
Offline
oh....
I thought that would've been the first base run, then the car was tuned and dynoed again (the 2 better looking graphs)...hmm, I dunno what went on with the green one then.
Offline
SAE 097 then 098
thats a weird Dyno
That dyno is probably good for tuning but im not sure if it can be used as a reference
Offline
goixiz wrote:
thats a weird Dyno
That dyno is probably good for tuning but im not sure if it can be used as a reference
Yeah, everybody was getting wacky numbers.
Offline
AWD Mustang Dyno.
Stage 2 with Cobb Map. high stall torque converter caused the weird torque spike.
Now you see why I'm not a fan of the OTS cobb maps.
15.3 @ 88 mph
Same mods + protune.
14.3 @ 96 mph
Offline
baseline pull got 230whp and 223tq after the tune he got 235whp and 235wtq. ALSO: missing is the 90*+ weather during the tune
Not an impresive gain, well kinda like a fart of gains, but the smoothness in the power delivery make it a much better everyday driver
-- INTAKE --
Injen - Cold Air Intake- WRX Wagon w/Heatshield RD1205P
Godspeed - Perrin Clone Turbo Inlet hose
SSAUTO - LARGE WRX/STI top Mount Intercooler Kit / y-pipe
Ported and polished
HTS - 3 Ply Silicone Coupler : 3.00
AbAs3 - Throttle Body -
Ported and polished
-- ENGINE --
COBB - ACCESSPORT
Perrin - Crank Pulley
Walbro - Fuel Pump: 255LPH HP
NGK - Iridium (one step colder)
-- EXHAUST --
SUBARU - Cast Iron Stock Headers
Ported, polished & Wrapped
HKS - UppipeStainless Steel
Ported, polished & Wrapped
AbAs3 - MONSTER PnP Turbo- WRX /Aero TD04L-13T
Ported, polished & Wrapped
Stromung - 3" Turboback Catted Twin Tip
Ported, polished & Wrapped
MODS ---
Grounding Mod
Throttle Body Bypass mod
Dual Catch can Mod
Last edited by AbACUZ (2007-03-15 15:51:42)
Offline
aba - not bad
What is target boost and AFR now ?
Not to be picky but i would expect with porting you should hit target boost at 3k and hold it till 5k
but its a nice smooth ratio thats nice
Offline
goixiz wrote:
aba - not bad
What is target boost and AFR now ?
Not to be picky but i would expect with porting you should hit target boost at 3k and hold it till 5k
but its a nice smooth ratio thats nice
11:1 AFR at 95 IDC , good for economy and No knock whatsoever and no leaning
the boost hits 16.9 at 3,500 and holds it 5,500+ to 12 and Dan ( the tuner ) said that boost was very steady and very smooth he said it was very easy to work on it since it was so constant.
Also I did not quite ported my turbo, It would be better described as Boring or extrude hone, cause i was All crazy on that thing. not my best, Rudi's as you can see came out better hehehehe.
Offline
Here is my latest graph after the Protune at Harman Motive. Similar gains as Aba. My baseline pull running the Cobb Stage 2 91 Oct. map was 225whp and 222lb tq. After the tune I'm now getting 235whp and 239ft lbs tq. Hit 17psi falling to about 13psi at redline. 11:1 AFR
My power mods are listed below:
-- INTAKE --
Stock Filter box with resonator
Godspeed - Perrin replica Turbo Inlet hose
STi TMIC with Perrin Coupler
AbA Pnp Throttle Body
-- ENGINE --
COBB - ACCESSPORT
Perrin - Crank Pulley
Walbro - Fuel Pump: 255LPH
NGK - Iridium (one step colder)
-- EXHAUST --
SUBARU - Stock Headers and cross pipe Ported, polished & Wrapped
Invidia uppipe
Invidia Catted Downpipe
Custom flex midpipe
Prodrive Round Tip Axle Back
Stock Turbo TD04L-13T Ported &polished
--Other Mods --
Grounding Mod
Throttle Body Bypass Mod
Dual Oil Catch Cans
Last edited by rdy4flt (2007-03-15 17:19:17)
Offline
VF39, STi Pink injectors, Walbro 255lph, NGK 1 stage colder plugs, STi intercooler, no cats:
Dynapack dyno
272.4hp / 257.2tq
Offline
06 Aero, VF39, JDM V7 STi TMIC, Cobb catted DP, STi Catback, K&N Drop-in
Pre-tune (Cobb 93 oct VF39 map) uncorrected: HP - 264, Torque - 279 Ft-lb, Boost 15 PSI
Tuned uncorrected: HP - 285, Torque - 304 Ft-lb, Boost 16.7 PSI
Tuned corrected: HP - 289, Torque - 307 Ft-lb
Last edited by LC (2007-07-11 21:24:02)
Offline
Just got back from the Saab92x.com group day at P&L Motorsports, tuned by Jorge on the DynoJet. Numbers ended up being 285whp/280wtq (maxed out at 20psi which tapered down to 18psi at redline) on 93octane:
Mods (if not mentioned, considered to be stock):
Cobb AccessPort Version 1
GM Boost Control Solenoid
Walbro Fuel Pump
2006 Subaru WRX 560cc injectors
NGK 1-step colder Iridium Spark Plugs
APS Turbo Inlet Pipe
2005 STi Intercooler with P&P Cast Y-pipe
P&P Throttle Body
P&P Coated Stock Exhaust Manifolds
GrimmSpeed V1 Coated/wrapped Crosspipe
Crucial Uppipe
P&P VF34 Turbo with Coated Hotside
APS Catted Downpipe
MadDad Halfback 3" to 2.5" intermediate pipe
STi Axleback muffler
Last edited by Whateverland (2007-08-08 17:09:52)
Offline
|